You can count on us for all your equipment needs. We have a large selection of welding equipment available for rent anywhere in the continental US. Rent by the day, week, month, or years. Contact us today to receive a custom rental package for your project.

•150A-200A Stick/TIG Inverters
• 300A Class Inverter Power Sources (Single, 4-pack, or 6-pack)
• 350A Multi-Operator units with DC distribution boxes
• 400A Class Inverter Power Sources (Single, 4-pack, or 6-pack)
• 600A Class Power Sources (Single, 4-pack, or 6-pack)
• Voltage Sensing Wire Feeders

 

Multi-weld with feeders
Welding System Diagram

Multi-Operator System

Welding System Components

  1. Power Source: Either electric, or engine driven with a minimum of 72 Open Circuit Voltage
  2. 4/0 Power Cable Extension (50′ Sections)
  3. 600 Amp Ground Clamp
  4. DC Distribution “Spider” Box
  5. 1/0 Power Cable Extension (50′ Sections)
  6. Multi-Weld 350
  7. LN-25 Pro Feeder
  8. Gas Supply (12-pack recommended)
  9. High Flow Inert Gas Regulator w/C-size Outlet
  10. 1/2″ Inert Gas “Bull” hose (50′ Sections)
  11. Inert Gas Manifold with 6 x 1/4″ Outlets
  12. 1/4″ Inert Gas Hose (50′ Sections)
  13. Work Piece
MIL XMT SERIESMIL XMT350 4PACKMIL XMT350 6PACK
Miller Power Source

XMT 350 & 350MPA

With multi-process capabilities and features like Auto-Line, the XMT 350 is  portable and versatile for applications from job-sites to factory floors.

SPECIFICATIONS:

Input Power:  208–575 Volts, Requires 3- or 1-phase power
Output Range:  10–38 Volts, 15–425 Amps
Net Weight: 80 lb. (36.3 kg)
Processes: MIG /Pulsed MIG / Stick / TIG / Flux-Cored / Arc Gouging

Extras: Reversible wheel kits / with or without plug installation

Available as single units, in 4-packs, or 6-packs

Welding Equipment Rental
Miller Wire Feeders

Suitcase X-treme 12VS

Portable wire feeding at its best. Voltage-sensing, arc-reach, portable feeders designed to run off arc voltage from almost any welding power source, provides extreme reliability for construction and fabrication.

  • ArcReach Technology
  • Remote Voltage w/o control cable
  • Digital Meters
  • Impact resistant case
  • Gas purge & wire jog

SPECIFICATIONS:

Input Power:  14-48 VDC / 110  OCV Max
Wire Feed Speed:  50-780 Inches Per Minute
Wire Diameter:  Solid .023″ – 1/16″     Cored  .03″ – 5/64″
Net Weight: 35 lb. (15.9 kg)
Processes: MIG /Pulsed MIG /  Flux-Cored

 

flextec 65013 Med Mart Rack Close Up 7751Flec 650
Lincoln Power Source

Flextec 650

Simple. Reliable. Flexible. This multi-process welder delivers up to 815 amps of welding power. Embedded CrossLinc® Technology drives welding control at the arc without an added cable to save costs, increase quality and enhance productivity and safety on the job site. The world-ready Flextec® 650X will run on a wide range of available voltage input power and is IP23 rated for outdoor operation and storage. Broad wire feeder compatibility is not an issue – The Flextec 650X will operate with almost any Lincoln Electric® wire feeder or welding process.

 

SPECIFICATIONS:

Input Power:  380/460/575 Volts, Requires 3-Phase  power
Output Range:  10-815 Amps / 44 Volts, 650  Amps 100% Duty Cycle / 750 Amps 60% Duty Cycle
Net Weight: 165 lb. (74.84 kg)
Processes: MIG / Stick / DC TIG / Flux-Cored / Arc Gouging

Extras: Reversible wheel kits / Voltage Reduction Device

Available as single units or in 4-packs

 

Flex 450450_6 packflex 450 pack
Lincoln Power Source

Flextec 450

This multi-process welder delivers up to 500 amps of welding power for a variety of applications, including construction and fabrication. It features an IP23 rating for outdoor operation and storage, and the inverter technology will save you real dollars on the utility costs associated with your welding operations.

SPECIFICATIONS:

Input Power:  380/460/575 Volts, Requires 3-Phase  power
Output Range:  10-500 Amps / 38 Volts, 450  Amps 60% Duty Cycle
Net Weight: 125 lb. (56.8 kg)
Processes: MIG / Stick / DC TIG / Flux-Cored / Arc Gouging

Extras: Reversible Wheel Kits / Voltage Reduction Device

Available as single units,  4-packs, or 6-packs

Miller Electric
Lincoln Power Source

Ideal Arc DC-655

This 650-amp, 100% duty cycle CV/CC power source is ideal for construction and shop fabrication because of its excellent arc performance and many energy saving features. This machine also has a high overall efficiency of 84% for even more energy and cost savings. Save money with the idle shut down timer that powers down the DC-655 when not in use for extra energy conservation. Keep internal components cool without wasting energy with Lincoln’s Fan-As-Needed (F.A.N.) that shuts off automatically when the system is cooled. Don’t think you’re sacrificing arc performance for efficiency; the DC-655 features a calibrated output knob for precise procedure setting and adjustable arc force for a tailored arc and ultimate low end performance – down to 50 amps – for excellent stick, MIG and TIG performance.

 

SPECIFICATIONS:

Input Power:  230/460/575 Volts, Requires 3-Phase  power
Output Range:  50-815 Amps /13-44 Volts / 650  Amps 100% Duty Cycle
Net Weight: 720 lb. (327 kg)
Processes: MIG / Stick / TIG / Flux-Cored / Arc Gouging

 

Available as single units  or 4-packs

v350V350 4PAKV 3506 pack
Lincoln Power Source

Invertec V350 Pro

The multi-process Invertec V350 PRO is an efficient, lightweight and portable choice for training, fabrication or construction applications. The versatile V350 PRO is ready for almost any welding job in shop or outdoor environments.

SPECIFICATIONS:

Input Power:  208-575 Volts, 1 & 3-Phase  power
Output Range:  5-425 Amps / 34 Volts, 350  Amps 60% Duty Cycle
Net Weight: 81 lb. (36.7 kg)
Processes: MIG / Stick / DC TIG / Flux-Cored / Arc Gouging

 

Available as single units,  4-packs, or 6-packs

In 25 ProIN 25Magmum 300
Lincoln Wire Feeder

LN-25 Pro Feeder

Portable Industrial Wire Feeders

LN-25 wire feeders are designed to be simple, reliable and easy to service. Whether you are an ironworker, pipeline welder, or weld at a construction site, shipbuilding facility or metal fabrication shop, we have the right semiautomatic wire feeder for you.

  • Magnum 300 MIG Gun Supplied
  • No Control Cables Needed
  • Internal Gas Solenoid & Flowmeter
  • Durable & Flame Resistant Case

SPECIFICATIONS:

Input Power:  15-110 VDC
Wire Feed Speed:  50-700 Inches Per Minute
Wire Diameter:  Solid .023″ – 1/16      Cored .03″ – 5/64
Net Weight: 37lb. (16 kg)
Processes: MIG /Pulsed MIG /  Flux-Cored
Miller Electric Multi-Weld 350 Multi-operator Welding system
Lincoln Multi-Operator Welders

Multi-Weld 350

Connect Several DC+ Welders to One Power Supply.

The Multi-Weld 350 is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the Multi-Weld 350 offers an entirely new and better way to build large structures. This unique system offers a cleaner, safer job site, and allows operators to have high performance welding control right where they need it — at the arc.

  • Independent Arc, Starting/Stopping doesn’t affect others,
  • No control cables needed,
  • Constant Voltage for MIG & Flux-Core Welding
  • Constant Current for Stick or Arc Gouging

SPECIFICATIONS:

Input Power: 80Volts DC
Output Range: 15-40 Volts,  30-350 Amps
Net Weight:  59 lb. (27 kg)
Processes: MIG / Stick / Flux-Cored / Arc Gouging

 

Our Rental Team

We are customization specialists. Every job has unique needs. We are here to make sure the equipment works for your project from start to finish. You’ll get more than a rental from us. You’ll get a dedicated support team no matter the size or location of the project.

Questions?

Can’t Find What You're Looking For?

Questions, comments, or just want to say hello? Feel free to reach out to us. We look forward to assisting you.