Hands-on Cobot Demo Day – March 23rd

Wondering if a Cobot Welder is for you?

You can even bring your own parts, or use ours, either way be prepared to be blown away!

Do you struggle finding skilled welders?

Utilize your skilled welders where they are needed and let the Cobot do the rest.

Would you like to maximize high batch/low volume work?

Programming to production in minutes. Very little down time allows cost effective low volume work.

Would speeding up production help your bottom line?

Consistent welding, always running. Arc=money being made.

This is Robotics at it’s best!

Smartphone App based software. Programming to running in minutes.

Demos can be scheduled between 7:30am to 5pm

MIG Welding Class – September 16th All Levels 8:00am – 12:00pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister

MIG Welding Class – February 10th All Levels 8:00am – 12:00pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister

MIG Welding Class – February 10th All Levels 12:30pm-4:30pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister

Hands-on Cobot Demo Day – March 23rd

Wondering if a Cobot Welder is for you?

You can even bring your own parts, or use ours, either way be prepared to be blown away!

Do you struggle finding skilled welders?

Utilize your skilled welders where they are needed and let the Cobot do the rest.

Would you like to maximize high batch/low volume work?

Programming to production in minutes. Very little down time allows cost effective low volume work.

Would speeding up production help your bottom line?

Consistent welding, always running. Arc=money being made.

This is Robotics at it’s best!

Smartphone App based software. Programming to running in minutes.

Demos can be scheduled between 7:30am to 5pm

Hands-on Cobot Demo Day – March 22nd

Wondering if a Cobot Welder is for you?

You can even bring your own parts, or use ours, either way be prepared to be blown away!

Do you struggle finding skilled welders?

Utilize your skilled welders where they are needed and let the Cobot do the rest.

Would you like to maximize high batch/low volume work?

Programming to production in minutes. Very little down time allows cost effective low volume work.

Would speeding up production help your bottom line?

Consistent welding, always running. Arc=money being made.

This is Robotics at it’s best!

Smartphone App based software. Programming to running in minutes.

Demos can be scheduled between 7:30am to 5pm

Hands-on Cobot Demo Day – March 21st

Wondering if a Cobot Welder is for you?

You can even bring your own parts, or use ours, either way be prepared to be blown away!

Do you struggle finding skilled welders?

Utilize your skilled welders where they are needed and let the Cobot do the rest.

Would you like to maximize high batch/low volume work?

Programming to production in minutes. Very little down time allows cost effective low volume work.

Would speeding up production help your bottom line?

Consistent welding, always running. Arc=money being made.

This is Robotics at it’s best!

Smartphone App based software. Programming to running in minutes.

Demos can be scheduled between 7:30am to 5pm

MIG Welding Class – March 4th All Levels 1pm – 5pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister

MIG Welding Class – March 4th All Levels 8:00am – 12:00pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister

MIG Welding Class – March 2nd All Levels 5:30-9:30pm

The Best MIG Welding Class in Minnesota

Your welding future starts here! Whether you are a beginner or an experienced welder Toll has welding training classes to fit your needs. Our MIG welding class will cover all the essentials you need to get started welding or enhance your skills.

Toll Gas offers students an opportunity to receive a hands-on welding training education through interactive learning, exciting classes, taught by the experienced professionals.

MIG program outline

  • Welding Safety
  • Introduction to GMAW
  • Volts, Amps, WFS
  • Short Circuit and Spray Transfer
  • Electrode Specifications
  • Shielding gasses
  • Welding on 10 ga, and 1/4” steel

Class format

  • 4 hours class length
  • 75 – 90 minutes classroom
  • 120 – 135 minutes hands-on-welding
  • Welding helmets and gear is supplied for training

Course certificate

Instructors

Each student will receive time for hands-on welding and coaching from the inctructor.

  • Dave Lynnes
  • Joey Mcalister